Up for sale is a NEW BTECH Mini UV-25X4 25 Watt Tri-Band Base, Mobile Radio: 136-174mhz (VHF), 220-230mhz (1.25M), 400-520mhz (UHF) Amateur (Ham). These are brand new units in the box. These radios run off 12 Volt power so they are perfect for installation your vehicle or powered from a battery. High / Low Power Settings (25W/10W); Frequency Range: 65-108 MHz(Only commercial FM radio reception) 136-174MHz (VHF), 220-260MHz (1.25M) (USA/ASIA), 350-390MHz (EU/ASIA), 400-520MHz (UHF); Broad (Wide) / Narrowband (Narrow) Selectable. Size: 98 (w) x 35 (h) x 118 (d) mm; 408g; 3.85 (w) x 1.38 (h) x 4.65 (d) in.UHF Jack SO-239, for PL-259 Cable Connection. Vehicle Cigarette Connector Power Cable (4.5'). Easy-to-read Manual (written in the US).
BTECH UV-25X4 X-SERIES MOBILE - 25 WATT TRI BAND RADIO. The X-Series Mobiles introduce our new fully customizable Multi-Color LCD display screen. You can adjust the complete display to be exactly as you want it.Beyond the display, you can fully customize your channels to display their alpha-numeric names or frequency settings. There are 200 programmable memory channels. You can add or remove channels from scanning list. You can give channels alphanumeric names.
You can easily program from a PC to set-up the radio to operate exactly as needed. Pair the UV-25X4 with the Nagoya TB-320A Antenna and RB-50 Magnetic Mount for easy installation with the UHF antenna connectors. The PC04 FTDI Cable is recommended for easier computer programming The UV-25X4 operates as multiple radios in one, with either 144 MHz, 220 MHz, or 430 MHz as the'Main' TX/RX band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-25X4 for simultaneous VHF-VHF or UHF-UHF operation, too! BTECH Radios are Designed in the USA BTECH Radios are not like other similar looking radios.BTECH radios are designed in the USA with custom firmware and internal hardware differences. A BTECH label means you are getting the best radio available!
A few of our differences are below: BTECH radios use an upgraded Power Chipset (other radios use a smaller incorrectly sized final that will burn out over time) Dual Synchronize Display Mode: Synchronize Up to 2 Channels - and display both their channel name and channel frequency! Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeater Expanded Frequency Range (up to 520MHz) Auto Power Off Function: Save your battery and prevent unnecessary power draining Channel Mode Editing Settings: Edit saved memory channels on-the-fly; our firmware does not require you to delete a channel to make changes New Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency Scanning Quad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission - customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies Randomization Privacy Mode Dual Simultaneous Display. DUAL SIMULTANEOUS DISPLAY The X-Series Mobiles also introduces our new dual sync mode!With this option, you can single or dual sync two different channels and display both their frequency and name simultaneously. If you prefer instead to monitor up to four channels; you can single line display a channel's name or frequency. Additionally, as a new feature added: you can even monitor both VFO (frequency) and channel modes simultaneously. True Adhoc (on-the-fly) Group/Private Calling. EDIT CHANNELS ON-THE-FLY Another feature introduced in the X-Series mobiles is the ability to edit your channel preferences without needing to program a new channel! You can edit tones, additional squelch information, and even add or remove it from your scanning list anytime!
Get the most from your Radio using our Free Software. GROUP TONES SUPPORTED The UV-25X4 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, and DTMF calling methods. Set-up your calling methods to call by group tones.Tone calling (private line) is required by most repeater applications and the UV-25X4 supports the latest standards. The UV-25X4 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands Get the most from your Radio using our Free Software. NEW SCANNING MODES A new menu allows you to select scanning resume methods.
You can set the radio to start scanning immediately during reboot, resume scanning if you interrupt scanning to transmit, or start scanning soon as it powers on. The UV-25X4 will save your scanning preferences even with a power interruption. Frequency scanning has gotten a full overhaul; you can edit and scan through frequencies exactly as you prefer. Set your frequency range and frequency interval (step) right through the UV-25X4 on-screen interface. The item "BTECH UV-25X4 25 Watt Tri-Band Base12 V Radio 136-174mhz VHF 400-520mhz UHF" is in sale since Friday, September 4, 2020.
This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers". The seller is "hotdogsales323" and is located in Lakewood, California. This item can be shipped to United States.