Sleek, simple, built to last for years to come. Rover/mobile tested at or above highway speeds.
Works great for VHF/UHF contests too. It's the perfect addon antenna for those who have high gain directional yagis. Save on rotator wear during vhf/uhf contests.Great for mounting on a rover/mobile or base station. Several are being used for beacons right now. This loop antenna can hear stations calling cq in all directions. Your directional yagi can't do that without constant turning.
Designed for use on digital modes like FT4/FT8 as well as CW and SSB only. Can be mounted on a mast pipe or mounted right to the side of your Rohn 25 tower. Element:----------------------- 5/16 inch diameter 6061 aluminum solid rod.
Useable Frequency:-------- 144 to 146 MHz (adjustable). Coax connection:------------ SO-239 Silver plated/Teflon (female).
Mounting Plate:--------------- 3/8 inch x 1 inch x 4 inch aluminum bar. Mast Clamp:------------------- 1-1/2 inch stainless steel U-bolt type with aluminum saddle. Minimum mounting height above ground: = 12 feet. Stacking distance between two loops: 65 inches (one above the other).
Gain figures:--- 1 to 4 dBd --- Depends on height above ground/angle/obstructions/surroundings/etc. Fully assembled measurements:---- Square = 12" x 12". SWR is set to 1.2 to 1 or less at 144.200 MHz. This loop antenna uses a gamma match for tuning. You do not need a balun or coil of coax at or near the antenna. An Allen wrench is provided for adjusting the swr if needed. Note: This has a Full wave length element. Sleek, simple, built to last for years to come design. Perfect for rover/mobile or base.Works great for Digital modes like FT4/FT8 and CW or SSB. Fully assembled/ tested/ ready to install. Useable Frequency:------------- 432 to 434 MHz. Coax connection:--------------- SO-239 Silver plated/Teflon (female). Mounting:---------------------- 3/8 inch x 1 inch x 4 inch aluminum bar.
Mast Clamp:-------------------- 1-1/2 inch stainless steel U-bolt type with aluminum saddle. Minimum mounting height above ground:-- 12 feet. Stacking distance between two loops:--- 36 inches (one above the other).
Fully assembled measurments:--- 8 inches x 9 inches. You must have a real address. No extra balun or coil of coax needed. Comes fully assembled, tested, ready to use. SWR set at 1.2 to 1 or less at 432.100 MHz.Allen wrench included if you ever need to adjust swr. I will post another listing with the N type connectors and send you the item number. If you want a different combination of antennas, Please contact me so I can List what you want. The item "144 MHz, 432 MHz LOOP PACKAGE, ANTENNA, HAM RADIO" is in sale since Saturday, May 8, 2021. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas".
The seller is "freqtester" and is located in Iowa City, Iowa. This item can be shipped to United States.