Switch to large capacity 5000mAh lithium battery, standby time is longer, and expand a USB interface. Usually, it can be used as a rechargeable treasure when the instrument is not used. The IC is charged by high current 2A, and the charging time is shorter.
Change to larger and better operating wave wheel. Switch to a power switch with a greater sense of operation and a better sense of operation.
Support Chinese and English menu switching. Upgrade the user program by virtual U disk.
Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument. The hardware block diagram of NanoVNA-F is as follows. NanoVNA-F measurement range is 50k-1GHz.
The harmonic spread measurement frequency of the output signal of the clock chip SI5351 is 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (standing wave ratio is less than 1.02). At the same time, a metal shield is designed for the RF front-end, so that the dynamic range of S21 is better than 60dB in the whole frequency band. Size: 14CM 7.5CM 2CM (length, width and height). RF output: - 13 DBM (maximum - 9 dbm). Display: 4.3 inch IPS TFT (800x480). USB Interface: USB Type-C Communication Mode: CDC (Serial). Power consumption: USB 5V 200mA, built-in 5000mAh battery, theoretical life of 18 hours, maximum charging current 2A.Output capability: 5V/1A, supporting Android and Apple phones. Number of calibration points: 101. Number of scanning points: 101. Display Tracking: 4, Mark: 4, Settings Save: 5.
Scanning time: about 1.9s/time (50kHz-1000MHz full frequency band). Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram... 19.0Wh (about 5000mAh after conversion) large capacity lithium battery. Designing a metal shield for the RF front end, allowing the S21 to have a dynamic range better than 60dB over the full frequency range. Power bank fuction: 5V/1A , Supporting Android and Apple Mobile.NanoVNA-F S11 parameter, SWR standing wave ratio test. UV9D antenna U-band standing wave ratio measurement, starting frequency: 300M, termination frequency: 600M, standing wave minimum frequency 441.000000MHz, SWR = 1.03. S21 insertion loss measurement, low pass, high pass, band pass filter measurement. Measuring 6.5M Ceramic Notch with NanoVNA-F. 1x NanoVNA-F 4.3 LCD Display 50KHz-1000MHz HF VHF UHF VNA Vector Network Analyzer.
1x Accessories show in picture. ________ _____________ _______________ __ _______________ _____. ___ ________________ _____________________ _____ _ ___________. You should receive item within 3-5 weeks.
But we will try our best to ensure the items reach soon. The item "50KHz-1000MHz NanoVNA-F 4.3 LCD Display HF VHF UHF VNA Vector Network Analyzer" is in sale since Tuesday, October 22, 2019. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Network Analyzers".
The seller is "jomobill" and is located in Guangzhou. This item can be shipped worldwide.