50kHz1000MHz NanoVNA VNA HF VHF UHF Vector Network Antenna Analyzer + 4.3'' LCD

  

Features: NanoVNA-F Mini Vector Network Analyser is a product based on the Open Source Project of NanoVNA. The RF part is consistent with the original version (NanoVNA-F uses harmonic spread measurement frequency to 1 GHz). NanoVNA-F hardware functions include and are not limited to the following improvements: 1. Use 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.

Switch to large capacity 5000mAh lithium battery, standby time is longer, and expand a USB interface. Usually, it can be used as a rechargeable treasure when the instrument is not used. The IC is charged by high current 2A, and the charging time is shorter. Change to larger and better operating wave wheel. Switch to a power switch with a greater sense of operation and a better sense of operation.

Support Chinese and English menu switching; 7. Upgrade the user program by virtual U disk. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument. Com/flyoob/NanoVNA-F The hardware block diagram of NanoVNA-F is as follows NanoVNA-F measurement range is 50k-1GHz.

The harmonic spread measurement frequency of the output signal of the clock chip SI5351 is 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (standing wave ratio is less than 1.02). At the same time, a metal shield is designed for the RF front-end, so that the dynamic range of S21 is better than 60dB in the whole frequency band. Specification: Size: 14CM 7.5CM 2CM (length, width and height) Measuring Frequency: 50kHz 1000MHz RF output: - 13 DBM (maximum - 9 dbm) Frequency accuracy. Note: Please allow minor errors due to manual measurement.

Item color displayed in photos may be showing slightly different since monitors are not calibrated same. 1pc of Nanovna meter 2pcs of SMA-JJ RG316 cable 20CM (NanoVNA-F is a standard SMA female connector, which is used to switch to M head and N head to better protect SMA female) 1 set of calibration parts (50 standard load x1, open circuit calibration piece x1, short circuit calibration piece x1, use the included calibration piece, the instrument can be calibrated to get good measurement result data) 1pc of SMA-JJ double needle 1pc of SMA elbow external screw inner hole to inner screw inner needle 1pc of Type-C data cable. We are committed to resolve all issues in a friendly and satisfactory manner.

Only unused, undamaged and original condition item can be qualified for a return. The item "50kHz1000MHz NanoVNA VNA HF VHF UHF Vector Network Antenna Analyzer + 4.3'' LCD" is in sale since Thursday, September 12, 2019.

This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Cable & Antenna Analyzers". The seller is "industrialmechanical" and is located in China. This item can be shipped worldwide.

• Port SWR: < 1.1
• Frequency accuracy: < 0.5 ppm
• Display Trackin: 4
• Number of scanning points: 101
• MPN: Does Not Apply
• Scanning time: about 1.9s/time (50kHz-1000MHz full frequency band)
• Settings Save: 5
• Brand: NanoVNA
• RF Output: 13 DBM (maximum - 9 dbm)
• USB Interface: USB Type-C Communication Mode: CDC (Serial)
• Output capability: 5V/1A, supporting Android and Apple phones
• Country/Region of Manufacture: China
• Display: 4.3 inch IPS TFT (800x480)