Unit is in very good condition and will be packaged in original box. Includes charger, charging dock, 16GB micro SD card, manual, quick start guide, antenna, belt clip and USB cable. With two independent receivers for both Analog and digital, you can listen to either the same or different bands simultaneously.
With 700mW of Loud, Crisp and Clear audio the FT-2DR is the perfect choice for noisy and crowded environments. The built-in worldwide standard AX. 25 Data TNC Modem permits uncomplicated APRS® (Automatic Packet Reporting System) operation. You will be able to display the information, station list; and use the message, SmartBeaconing TM function. You will be able to track your APRS® movement on the Internet websites.
The digital GM function automatically checks whether members registered in a group are within communication range, and displays information such as distance and direction for each call sign on the screen. This convenient function makes it possible not only to see whether any friends are in communication range, but also to instantaneously determines the location and relationship between all members of the group. This function can also be used to send messages and data such as images between members of a group, permitting convenient and fun communication between friends when out for a drive or hike.Sent and received messages and images can be checked on the LOG List screen, with icons making them easy to distinguish. Backtrack Function to Return to Departure Point. This function allows navigation back to the departure point, or a point previously added to the memory. When hiking or camping, just register the starting point or the position of your tent and then you can constantly check the direction and distance from your current position.
The arrow of the compass display constantly shows the direction to the registered point, making it extremely convenient in finding your way back to the registered place - just move in the direction so that the arrow in the heading-up display points straight upward. The Automatic Mode Select function detects the receive signal mode The transceiver automatically selects one of the four communication modes according to the signal received. This is extremely convenient when listening for communications, as you do not need to be aware of the other party's communication mode. The transceiver can also be operated in a fixed communication mode.
The FT-2DR operates in one traditional analog mode and three digital modes! Enjoy communication in the mode that best suits your needs.V/D Mode (Simultaneous Voice/Data Communication Mode) Half of the bandwidth is used for voice signal with error correction. The transceiver uses powerful error correction technology developed for professional communication devices. The very effective error correction code provides benefits such as minimal interruption of communication.
The basic digital C4FM FDMA mode provides a good balance between sound quality and error correction. Voice FR Mode (Voice Full Rate Mode) This mode uses the entire 12.5 kHz bandwidth to transmit digital voice data.
The larger voice data size allows voice communication with high sound quality. Use this mode for pleasing sound quality communication between amateur radio friends.
Data FR Mode (High-speed Data Communication Mode) A high-speed data communication mode that uses the entire 12.5 kHz bandwidth for data communication. The transceiver automatically switches to this mode when sending and receiving images, allowing a large amount of data to be transmitted quickly. Analog FM Mode Analog FM is effective for communication with a weak signal that causes voices to break up in the digital modes. The analog mode allows communication even at distances where noise and weak signals make communication almost impossible. The tried-and-trusted low-power circuit design uses less battery power than the digital modes.
5 Watts Solid RF Power. The FT-2DR outputs a maximum of 5 Watts of clean RF power, with selectable power-saving choices of 2 Watts, and ½ Watt also being available with a simple touch of the screen.With a high capacity 7.2v 2200 mAh battery pack (SBR-14LI) every operator can enjoy reduced charge time, and extended periods of talk time in between charging cycles. Integrated 66ch High Sensitivity GPS. Integral GPS receiver and antenna (located on top of the radio) provides location, time, direction and APRS® information.
The FT-2DR has a very useful GPS data transmission capability. This is a real-time navigation function that records the location and direction of Group Monitor (GM) stations. Digital V/D Mode communicates information such as position data at the same time as the voice signal, allowing you to view the distance and direction of the other party in real time while communicating. This makes it possible to confirm your position and the other party's in situations such as hiking and driving where your positions are constantly changing, providing an easy way to meet up or join routes. RX : 76 - 108 MHz (FM Broadcast) 108 - 137 MHz (Air Band). TX: 144 - 148 MHz, 430 - 450 MHz. 1.8 - 30 MHz (SW Band) 30 - 76 MHz (50 MHz HAM). 137 - 174 MHz (144 MHz HAM) 174 - 222 MHz (VHF Band). 222 - 420 MHz (GEN1) 420 - 470 MHz (430 MHz HAM). 470 - 774 MHz (UHF Band) 774 - 999.90 MHz (GEN2). RX: 108 - 137 MHz (Air Band).137 - 174 MHz (144 MHz HAM). 174 - 222 MHz (VHF Band). 222 - 420 MHz (GEN1).
420 - 470 MHz (430 MHz HAM). 470 - 580 MHz (UHF Band). Modulation Type: F1D, F2D, F3E, F7W. Case Size(W x H x D): 62 x 110 x 32.5 mm (w/ SBR-14LI, w/o Knob and Antenna).
62 x 110 x 27 mm (w/o SBR-14LI, Knob and Antenna). Weight: 310 g With SBR-14LI and Antenna. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers". The seller is "smto-0" and is located in this country: US. This item can be shipped to United States.